HUNT 36 UD Carbon Spoke Wheelset
|Depth||Width ext||Width int||size|
EZO (Steel) Bearings - Limited Stock (€1,549)
CeramicSpeed Bearings - Dec Wk 3 (€1,899)Items are selected to ship from us in the week stated. Delivery time is 3-6 days*
We will ask for Axle info after checkout.
All import duties, taxes and handling costs are covered by us.
Order ETA 3-6 days*
Our wheels are in high demand, don't miss out. Order now.
*If shown in stock
FREE LIFETIME CRASH REPLACEMENT
To ensure you're not out of pocket should the worst happen. Learn more.
The Purpose _
The Purpose _
Full Specs _
RimsAdaptive filament wound rims, allowing us to engineer strength into the high stress spoke areas where it is most needed, and allow for lightness where it isn't.Toray T700/T800 unidirectional and 3K weave carbon-fibre with 3K weave bed and spoke areas.26mm outer and 19mm inner width ideal for 23-45mm tyre widths.36mm depth, with wide rounded aero section.HookedGriptec brake-track. Please note: We are not able to control other brands brake pad compounds and we cannot test every possible brake pad so please use only our HUNT Brakco Griptec carbon specific rim brake pads with these wheels. Two pairs of pads are included with your wheels and further sets can be ordered from here. We chose the Brakco Griptec pads because they outperform a lot of the market leaders’ best selling compounds in both dry and wet laboratory conditions.Raw filament wound surface finished with matt white contrasting graphics.HUNT Black Shield tubeless rim tape fitted.
SpokesUD carbon fibre spokes with incredibly high strength, stiffness and weighing only 2.7g per spokeFront: 16 spokes laced radially - aero profileRear: 21 spokes laced 2 cross drive-side and radially non-drive side
NipplesTaperLock nipples secure spoke head to the hubSquare mandrel mounted at the rim end to prevent spoke twisting when truing/replacingInternal nipple for truingBlack anodized finish
Front HubTaperLock spoke interfaceForged and CNC’d 6061-T6 heat treated aluminium alloy body.7075-T6 aluminium alloy axles.Circular machined dropout interface steps for added stiffness.Polished anodized black finish with laser graphics.
Rear HubTaperLock spoke interfaceCircular machined dropout interface steps for added stiffness.3x treble-tooth pawl engagement for instant acceleration - 7.5 degrees engagement.7075-T6 heat-treated aluminium alloy freehub body.Forged and CNC’d 6061-T6 heat treated aluminium alloy body.7075-T6 aluminium alloy axles.Polished anodized black finish with laser graphics.Steel Spline Insert freehub body reinforcement provides excellent durability against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.All freehub standards accounted for
BearingsIndustry leading CeramicSpeed hybrid ceramic bearings (or standard EZO steel bearings)CeramicSpeed bearings last 3 to 5 times longer than other ceramic bearings on the market and 10 times more than standard steel bearings.CeramicSpeed bearing balls are of the highest quality Grade 3 Silicon Nitride, featuring the highest achievable surface finish and roundness. 15% harder, take 99% higher loads and are more than 100% smoother than other ceramic balls typically seen in the market. The smoothness and the hardness of the CeramicSpeed Balls are unique.4 year warranty (When registered with CeramicSpeed)
Tyres InfoHUNT recommends a 28mm tyre for best performance, tyre widths between 23mm and 45mm are also safe to use. Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.
Axle SizesHUNT Super-light Race Season design, only 33g front and 37g rear7075-T6 heat-treated alloy lever, head and nut.Brass cam plate actuation.1000kgf tested high-strength cro-moly spindles.Corrosion resistant stainless steel springs.Polished anodized black finish with laser graphics.
Bike Magazine and Websites Expert's Views
What's in the box _
ABOUT HUNT _
Hunt Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.
Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.
All of our wheels are built and finished by hand, inclusive of a full quality control inspection.