HUNT SuperDura Dynamo Disc Wheelset

• Tubeless-ready; designed to work excellently with normal clincher tyres and tubes or tubeless tyres. 
• Hooked rim with H_LOCK bead-seat up-kicks for easy and secure tubeless installation. 
• 6069-T6 heat-treated aluminium alloy. 
• Disc-specific, asymmetric profile: 26mm outer and 22mm inner width, 24.5mm-deep profile. 
• Micro-peened black finish strengthens the surface even further. 
• Laser etched graphics for excellent durability. Featuring a black night-safe reflective decal for improved visibility during low-light/night riding 

• 32 spokes laced 3 cross front and rear.
• Sapim D-Light spokes.
• J-bend interface for easy sourcing or repairs in remote areas.
• Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden.
• Triple butted 2.0-1.6-2.0.
• Black stainless treatment

• 14-gauge brass nipples for increased durability, corrosion resistance and self-lubricating properties. 
• 16mm length for a strong connection to the spoke added durability. 
• Square body for external adjustment and square head for easy internal adjustment/tensioning 

• HUNT recommends a 25-40mm tyre for best performance, tyre widths between 25mm and 50mm are also safe to use.
• Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here.
• Tubeless-ready for lower weight and rolling resistance.
• You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.

These wheels are available with most existing disc brake road bike axle adapter sizes. We fit the axles you need, just complete the simple form shown after checkout: 

• Front: 12x100mm Thru-Axle | Quick Release 9x100mm 
• Rear: 12x142mm Thru-Axle | 12x135mm Thru-Axle | 10x135mm Thru-Axle | Quick Release 9x135mm 

*Shimano Microspline and Campagnolo CN3W is only available in 12x142mm 

If you are unsure what size your axles are don't worry it also includes the option to tell us your bike model and we will find out and then fit the correct axles, plus we're happy to change them later at our cost if you don't quite get it right. Please note; this form is shown after you have completed your order.

SONdelux 12mm

• 3 Watt | 6 Volt output at 18-19kmh. 
• Tested to German road traffic regulations (StVZO) standard K687 for output requirement. 
• Efficiency: 65% at 15 km/h in 700c wheel. 
• No-Load Power Input: 0,4 W at 15 km/h in 700c wheel 
• Magnets: neodymium boron, 26 poles. 
• Connection: 4.8 mm flat spades, 2-pin, to connect without ground connection (special design without connectors). 
• Axle Ends: stainless steel. 
• Bearings: deep groove ball bearing 629-2RSH (SKF). 
• Hub Shell: aluminium 6082-T6. 
• Sealing: alloy dust shields, rubber lip seals and a pressure compensation system which prolongs bearing life by reducing water being drawn into the hub system. 
• Hub warranty: 5 years. 
• Weight 395g. 
• Center-lock disc mount. If you require a 6-bolt adaptor you can purchase it separately here. 

• 40t ratchet rings on floating carrier for 9˚ engagement. Engaging 40 teeth simultaneously to handle high torque loads. 
• H_Ceramik freehub body reinforcement coating provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies. 
• All freehub standards accounted for. 
• 6066-T6 heat-treated aluminium alloy hub shell. 
• Machined angled spoke flanges for better bracing angles. ·
• Center-lock disc mount. If you require a 6 bolt adaptor you can purchase it separately here. 
• Polished anodized black finish with laser graphics. 

• Super smooth precision stainless steel cartridge bearings. 
• Dual full-contact seals. 
• Cartridge design for convenient servicing.