As we roll into winter and daylight hours a fewer, our focus shifts from summer miles to cold weather adventures. Whether it’s crisp morning commutes or multi-day bikepacking trips, reliable lighting becomes essential and there’s no better way to keep those lights charged than with a dynamo wheelset.

A dynamo hub is a small electric generator built into the hub to power common devices such as lights and even phones and GPS. Surprisingly, the Dynamo has been around since the 1930s and has since become more and more sophisticated and efficient to enable riders to charge small devices like GPS' or even phones.

Converting mechanical energy generated by riding to electrical energy, bands of copper wire rotate between the poles of magnets - for us less tech types, this means, once you ride you will start to generate electrical power. The trade-off is a very slight induced drag, but this can be surprisingly low if you choose the right dynamo hub.

We have chosen to partner with the world's leading dynamo hub specialist, SON which hand manufacture in Germany and have a dynamo system with 20% lower drag ideal for fast drop bar bikes for your serious commute and bike-pack adventure. With incredibly low rolling resistance in the SON Delux Dynamo at just 4.6 watts (at 12mph when powering the USE REVO light at 800 lumen output) and very low weight the SON Delux is not exactly low cost but it is THE best... When the light is switched off there is just 0.4 watts resistance, that is comparable to the low resistance of many sealed bearing hubs!

Much like the search for the most aero rim shape or the perfect balance of spoke tension, when it comes to Dynamos there are two words which push the design of dynamos: efficiency and drag.

For a dynamo to be efficient, it means it is able to generate more electricity off less power. For instance, the SONDelux Dynamo selected on our 700C SuperDura Dynamo disc and its smaller sibling, the 650B AdventureSport Dynamo disc wheels, produces a 3 watt / 6 volt output at 18-19kmh (~11-12mph) creating a potential 800 lumens on the Exposure Revo light. This sits at the pinnacle end of Dynamo efficiency (see graph below).

Now enter Drag. Drag here refers to rolling resistance. Typically thought of as an issue dealt only with tyres or bearings, a dynamo hub will most often induce an slight increased drag/rolling resistance over its standard wheel counterparts due to the magnets and rotating copper essentially working (all be it in a small way) against your efforts. Thankfully, SON realised that by using a smaller/lighter generator in their SONDelux Hub, they could reduce drag by an impressive 20% and still achieve the same 3 watt / 6 volt output with the faster speeds on drop bar bikes.

Even at 10mph, you will get upwards of 500 lumens from an Exposure Revo light and it has stand light capacitor to provide bright lighting long after you stop pedaling. For all the details about the Exposure, Revo Dynamo light click here. Here is a comparison between common options. The lower the line the more efficient the system. HUNT uses the SONDelux in all Dynamo Wheelsets. The lower the line the more efficient the system. HUNT uses the SONDelux in all Dynamo Wheelsets.