HUNT 4 Season Superdura Disc Wheelset

• Tubeless-ready – designed to work excellently with normal clincher tyres and tubes or tubeless tyres.
• Hooked rim with H_LOCK bead-seat up-kicks for easy and secure tubeless installation.
• 6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6).
• Disc-specific tubeless-ready profile.
• 26mm outer and 22mm inner width.
• 24.5mm deep profile.
• Micro-peened black finish strengthens the surface even further.
• Laser etched graphics for excellent durability. Featuring a black night-safe reflective decal – perfect for visibility during low-light/night riding.

• 32 spokes laced 3 cross front and rear.
• Sapim D-Light spokes
• J-bend interface for easy sourcing or repairs in remote areas.
• Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden.
• Triple butted 2.0-1.65-2.0
• Black stainless treatment.

• 14-gauge brass nipples for increased durability, corrosion resistance and self-lubricating properties.
• 16mm length for a strong connection to the spoke for added durability.
• Square body for external adjustment and square head for easy internal adjustment/tensioning
  

HUNT 4 Season

• Forged and CNC’d 6066-T6 heat-treated aluminium alloy hub shell.
• Machined angled spoke flanges for better bracing angles to further increase durability
• 7075-T6 aluminium alloy axles.
• Center-lock disc mount. If you require a 6 bolt adaptor you can purchase separately here
• Polished anodized black finish with laser graphics.

HUNT 4 Season H_Ratchet DBL

• 40 tooth ratchet rings on floating carrier for 9˚ engagement. Engaging 40 teeth simultaneously to handle high torque loads.
• H_Ceramik freehub body reinforcement coating provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
• All freehub standards accounted for.
• 6066-T6 heat-treated aluminium alloy hub shell.
• Machined angled spoke flanges for better bracing angles.
• Center-lock disc mount. If you require a 6 bolt adaptor you can purchase it separately here.
• Polished anodized black finish with laser graphics.

• Super smooth precision bearings with proprietary waterproof grease specially selected for even the worst weather.
• Sealed cartridge replaceable units.
• Dual full-contact seals.
  

HUNT recommends a 25-40mm tyre for best performance, tyre widths between 25mm and 50mm are also safe to use.

Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here.

Tubeless-ready for lower weight and rolling resistance. Also designed to work excellently with standard clincher tyres and inner tubes

You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.

These wheels are available with most existing disc brake road bike axle adapter sizes. We fit the axles you need, just complete the simple form shown after checkout:

Front: 12x100mm Thru-Axle, Quick Release 9x100mm, 15x100mm Thru-Axle
Rear: 12x142mm Thru-Axle, 12x135mm Thru-Axle, 10x135mm Thru-Axle, Quick Release 9x135mm*

If you are unsure what size your axles are don't worry it also includes the option to tell us your bike model and we will find out and then fit the correct axles, plus we're happy to change them later at our cost if you don't quite get it right. Please note; this form is shown after you have completed your order.

*Shimano Microspline and Campagnolo CN3W is only available in 12x142mm