HUNT Proven Carbon Enduro H_Core V3 MTB Mullet Wheelset

- Hookless, (F)31/(R)30mm internal rim width, 38mm external and 23mm depth
- 4mm rear rim side wall/bead width for added pinch flat puncture resistance
- H_Core internal carbon insert which increases density of fibres for greater strength.
- Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included.
- H-lock bead-seat up-kicks for easy and secure tubeless installation.

-28 front & 32 rear spokes laced 3 cross lacing pattern.
-J-bend cold drawn for strength.
-Made from high-grade T302 (18/10) stainless steel wire by Sandvik Sweden.
-Front Spokes are triple butted 2.0-1.7-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement) to increase compliance.
-Rear Spokes are triple butted and 0.1mm wider than the front spokes at 2.0-1.8-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement) for a stronger build and increased impact resistance.
-Black stainless treatment for anti-corrosion resistance.

- Manufactured from brass for corrosion resistance, strength and self-lubricating qualities.
- Square internal head for easy internal adjustment/tensioning.
- 16mm length with washer for a strong connection to the spoke added durability.
- 14 gauge.
- Black hard-anodized finish.

- CNC’d 6066-T6 heat treated aluminium alloy body, heat-treatment alters the microstructure of the alloy adding further strength.
- 7075-T6 aluminium alloy axles.
- Polished anodized black finish with laser graphics.
- 6 bolt disc mounting.

- H_Ratchet XL 40T DBL
- Stepped double 40T ratchet ring equals 9° engagement. With a larger ratchet disc for the inboard side, allowing for greater torque load for excellent durability.
- CNC’d 6066-T6 heat treated aluminium alloy body.
- 7075-T6 stepped aluminium alloy axle. The stepped axle increases the stiffness of the hub, reducing side load on bearings to help them last longer.
- H_CERAMIK freehub body reinforcement coating (Shimano/Sram HG body) provides excellent durability and protects against cassette sprocket damage to the freehub often seen on standard alloy freehub bodies.
- Labyrinth bearing sealing, reduces dirt and water ingress.
- Polished anodized black finish with laser graphics.
- 6 bolt disc mount.
- All freehub standards accounted for.

- Super smooth precision stainless steel cartridge bearings. Enduro ABEC 5 bearings are designed specifically for bicycle applications as they offer the deepest grooves and largest balls possible in every size to increase bearing strength and durability
- LLU dual full-contact seals to reduce bearing water and dirt ingress for a longer service life.
- Cartridge design for convenient servicing.

• HUNT recommends a 2.3"-2.6" tyre for best performance, tyre widths between 1.9" and 2.8" are also safe to use. 
• Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here.  
• Tubeless-ready for lower weight and rolling resistance.  
• You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.

- Boost - 148x12mm (rear) with 110x15mm (Front). Rock Shox Torque Caps available - request in notes at checkout.
- SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible.